MXBON® Ethyl Cyanoacrylate Adhesive Series mxbon ethyl cyanoacrylate adhesive series
The MXBON® Ethyl Cyanoacrylate Adhesive Series is designed for rapid bonding on dry, porous, low-surface-energy, or acidic materials, as well as in low-humidity environments. These adhesives are also suitable for automated production lines and continuous assembly operations.
For materials that are difficult to bond, where most adhesives fail to perform effectively, users should first verify whether the substrates belong to this category before application.
Usage
The MXBON® Ethyl Cyanoacrylate Adhesive Series offers multiple advantages for industrial applications. Easy to operate, it enables rapid positioning and securing of parts without adding weight. It shortens curing time, reduces machining costs, and simplifies surface cleaning. Broadly applicable across different materials, it delivers strong bonding performance on most substrates.
Characteristics
-
21401
Low viscosity, resistant to 121°C heat, surface insensitive
Transparent and colorless, rapid curing.
Suitable for adhesion of most materials.
Especially for bonding to insensitive surfaces and low energy surfaces.
Volume：20g / 500g -
21406
Ultra low viscosity, resistant to 121°C heat, surface insensitive
Transparent and colorless, rapid curing.
Suitable for post-assembly application of adhesive for capillary infiltration adhesion.
Especially for bonding to insensitive surfaces and low energy surfaces.
Volume：20g / 500g -
21416
Medium viscosity, general purpose, seam-filling capabilities
Can be used for gap bonding of 0.2mm.
Suitable for bonding rough or irregular surfaces.
Especially suitable for adhesion between plastic and rubber.
Volume：20g / 500g -
21420
Ultra low viscosity, penetration type, rapid curing
Suitable for post-assembly application of adhesive for capillary infiltration adhesion.
Especially suitable for adhesion between plastic and rubber.
Volume：20g / 500g -
21454
Gel-like, resistant to 121°C heat, surface insensitive
Transparent and colorless, rapid curing.
Suitable for vertical surface adhesion and filling of large gaps.
Suitable for adhesion of most materials .
Especially for bonding to insensitive surfaces and low energy surfaces.
Volume：20g -
21495
Low viscosity, resistant to 121°C heat, general purpose
Low viscosity, rapid curing, high temperature resistant.
Suitable for adhesion of most materials.
Especially suitable for adhesion between plastic and rubber.
Volume：20g / 500g
Technical Information
| Item No. | Appearance |
Viscosity mPa.s |
Shear Strength N/m㎡ (Psi) |
Temperature Range (℃) |
Tg (℃) |
(Shore D) | Fixture time (sec) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MS | AL | ABS | PC | NBR | |||||||
| 21401 | Transparent | 80-150 | 28 (4,036) |
-54℃-121℃ | 150℃ | D 85 | <10 | <10 | <5 | <10 | <10 |
| 21406 | Transparent | 15-40 | 26 (3,803) |
-54℃-121℃ | 150℃ | D83 | <10 | <10 | <5 | <15 | <15 |
| 21416 | Transparent | 900-1,500 | 25 (3,637) |
-54℃-100℃ | 150℃ | D84 | <25 | <30 | <40 | <20 | <10 |
| 21420 | Transparent | 1-5 | 26 (3,758) |
-54℃-100℃ | 150℃ | D84 | <25 | <20 | <20 | <30 | <10 |
| 21454 | Clear to slightly cloudy gel | 150,000-200,000 | 25 (3,680) |
-54℃-121℃ | 150℃ | D84 | <5 | <20 | <5 | <15 | <5 |
| 21495 | Transparent | 20-60 | 27 (3,877) |
-54℃-121℃ | 150℃ | D83 | <10 | <10 | <5 | <15 | <15 |
Contact Us contact us