PRODUCT DESCRIPTION
MXBON ACCELERATOR MX-2001G is a single component non-CFC
solvent based surface accelerator in on aerosol spray. The accelerator
is designed to promote the speed of cure of
MXBON cyanoacrylate products. The accelerator is HIGHLY FLAMMABLE.
TYPICAL APPLICATIONS
ACCELERATOR 2001G is used where increased cure speed of MXBON
cyanoacrylate products
is required. It can be either pre-or post-applied to the bond. However it is
especially suited for post application on cyanoacrylate adhesives to ensure
rapid fixturing.
Typical examples are securing wires or coils to PCB's, tamperprooting
adjustable components,
mounting stand-offs, edge guides and board stiffeners.
PRODUCT DESCRIPTION
ACCELERATOR MX-2001L is a single component non-CFC solvent
based liquid surface accelerator. The accelerator is designed to promote the
speed of cure of MXBON cyanoacrylate products.
The accelerator is HIGHLY FLAMMABLE.
TYPICAL APPLICATIONS
ACCELERATOR 2001L is used where increased cure speed of MXBON
cyanoacrylate products is required. It can be either pre-or post-applied to
the bond. However it is especially suited for post application on
cyanoacrylate adhesives to ensure rapid fixturing. Typical examples are
securing
wires or coils to PCB's, tamperprooting adjustable components, mounting
stand-offs, edge guides
and board stiffeners.
PRODUCT DESCRIPTION
MXBON 2100 Polyolefin Primer is a single component material
which dries rapidly at room temperature. It makes polyolefin and other low
energy surfaces suitable for bonding with MXBON cyanoacrylate products. On
such treated surfaces the cured performance of MXBON cyanoacrylate products
is the same as described in the TDS for the appropriate adhesive, except for
some specific points described herein.
TYPICAL APPLICATIONS
Polypropylene, polyethylene, PTFE and thermoplastic rubber
materials are normally difficult to
bond. However, when treated with MXBON 2100 Polyolefin Primer adhesion can
be achieved with MXBON cyanoacrylate products.
